Advanced Gate Tech

GTO has a full line of state of the art AC powered swing and slide gate operators. They are controlled by self diagnosing microprocessor based control boards. They feature inherent obstruction sensing, which will reverse direction and stop in either the open or close cycle, if an obstruction is encountered. This safety feature is independent of any external safety devices connected to the system, such as safety edges or photo beams.

The GTO/PRO

Standard Features on all GTO/PRO AC Systems…

Adjustable auto-close timer: 1 - 120 seconds.
Independent obstruction settings for opening and closing cycles.
Diagnostic and error condition LEDs.

Continuous Duty AC Gate Operator

Six separate terminals for Normally Open contacts (e.g., safety edges or
photoelectric sensors).

Mechanical limit controls.

GTO remote mounted RF receiver tuned to 318 MHz.

Hand held transmitter (remote control) included.

Basic Systems...

The SL-5000 Slide Gate Operator: Features a 1/2 hp, 115 Vac, 60 Hz, 5 A., continuous duty motor; a totally enclosed 30:1 60 series gear reducer and handles gates weighing up to 1000 pounds and 40 feet long.

The SL-6000 Slide Gate Operator: Features a 1 hp, 115 Vac, 60 Hz, 9.8 A, continuous duty motor; a totally enclosed 30:1 60 series gear reducer and handles gates weighing up to 2500 pounds and 50 feet long

The SW-5000 Swing Gate Operator: Features a 1/2 hp, 115 Vac, 60 Hz, 5 A., continuous duty motor; a totally enclosed 900:1 double reduction gear reducer and handles gates weighing up to 1000 pounds and 20 feet long.

The SW-6000 Swing Gate Operator: Features a 1 hp, 115 Vac, 60 Hz, 9.8 A., continuous duty motor; a totally enclosed 900:1 double reduction gear reducer and handles gates weighing up to 1800 pounds and 20 feet long.